Warning: Illegal string offset 'wp_post_meta_tag_description' in /home/wwwmagussecure/public_html/wp-content/plugins/wp-meta-tags/wp-meta-tags.php on line 142

Warning: Illegal string offset 'wp_post_meta_tag_keywords' in /home/wwwmagussecure/public_html/wp-content/plugins/wp-meta-tags/wp-meta-tags.php on line 146

Warning: Illegal string offset 'wp_post_meta_tag_robots' in /home/wwwmagussecure/public_html/wp-content/plugins/wp-meta-tags/wp-meta-tags.php on line 150

CCTV Tester- 3.5″ – MAT02


 • 3.5″” TFT/LCD colour display.
• Rouged construction with shock proof cover.
• Camera video signal strength tester can sense gain-loss strength in cable like low / normal / high & mV
• Colour chart (pattern generator) for monitor testing.
• PTZ controller can support preset programing & recall.
• Serial data analyst can capture and analyze RS232 & RS485 control data & helps fix the related data.
• LAN cable tester & tag number identification.
• 4 digit digital multi meter with auto range selection.
• Support capacitor tester.
• Multi-protocol support. All major speed dome cameras supported.
• Multi-interface and multi-baud rate.
• Advance power control system with auto power cut off.
• Rechargeable battery, charge for 4 hoursand use for 12 hours.
• The device has advanced power system, can supply power for camera as well (DC/12/100mA).

Display Size 3.5″ TFT/LCD Display
Display Resolution 960 x 240 Pixel
TV System NTSC / PAL (Auto Select)
Tester Mode Digital Multi meter, A/V Tester, Monitor tester, PTZ Controller, LAN Cable Tester & Data Monito
Video Tester For Gain losses in cables testing, Camera Demo, Site survey, OSD Setting in camera, camera positioning
Audio Tester External audio Input / Built in Speaker
Monitor Tester for Monitor fine tuning like colour correction, brightness contrast settings.
PTZ Controller for controlling of PTZ camera, Preset Programing & Recall
LAN Cable Tester RJ11, RJ45 can identify Cross over, Straight through, Wrong connection, Cable ID Numbers
DATA Terminal Serial DATA analysis
Digital Multi meter Digital multi meter present
User Interface Simple menu setting easy to use
Protocol American Dynamics, Bosch, CBC, Hik-vision, Kalatel, LG, LiLin, Molynx, Panasonic, PELCO-P/D, SAMSUNG, SANYO SSP, SONY, TeleEye, VCL, Vicon, YAAN
DATA format RS232, RS 485 & RS22 (Simplex)
Baud Rate 150, 300, 600, 1200, 2400, 4800, 9600, 19200Bps
Power Adaptor Input 100 ~ 230V AC / 50/60Hz & Output 5V DC 1.5Amps
Battery Built in rechargeable battery 3.7V 3000mA H
Duration Charging/Backup 3~4Hrs Charging / Backup 12HRs Approx. under Normal Operation / with camera load 4Hrs Approx.
External Interface
Video Input 1Ch Composite Video 0.5~1V p-p 75Ohm Auto Termination (BNC)
Video Output 1Ch Composite Video 1V p-p (BNC) (Mode: Loop out or patter Generator)
Audio Input Mono Audio (3.5mm Stereo Plug)
Communication port 2Pin Plug for RS485 & 9 pin ‘D” Connector for RS232
Network port RJ45 port for Cable Testing
Power Supply Output DC12V / 500mA (Power Input to cameras)
Power Supply Input Support USB or Power adaptor for charging
Product Dimensions 189mm x 112mm x 47mm
Box Dimensions 255mm X 87mm X 200mm (W x H x D)
Gross weight 500gm
Accessories Power adaptor, Rechargeable battery, CCTV tester carry bag, Shoulder strip, User manual, Cable tester, BNC to BNC Patch card, Audio cable, Telemetry cable, DC to DC power cable for camera & USB to DC Pin for charger & Multi meter probe.
Temperature & Humidity +0°C ~ +50°C / 30% ~ 90% RH


See also different:
  • << return to products